pcpartsandcables support pages



For general purpose electronic/IT/communications applications a range of pin header to pin header cables connector cables are available.

These cables are tyically used for wire to board or board to board connections.

Available custom cables can include connectors with the following pitches -

2.54 mm, 2.5 mm, 2.0 mm, 1.25 mm, 1.0 mm.

Any of the above pitches can be mixed so for example you can have a 2.54mm pitch connector at one end of the cable and a 2mm pitch connector at the other end.

Cables can be constructed using -

  • Individual multi-coloured wires.

  • A suitable multicored shielded or unshielded cable.

    For 2.54mm and 2mm pitch connectors female (socket) and male (pin) termination connectors are available.
    For other pitches female (socket) termination is available.

    Minimum order quantities and lead times

    Please note this information is given for guidance only. You should contact us for specific information on MOQ and delivery lead times.

    For cables that use standard rectangular 2.54 mm or 2mm pitch connectors there is not normally a mimimum order quantity.

    If your cable needs a special connector an MOQ may apply if we do not have a matching connector in stock.
    The MOQ in this case may be 10 - 20 cables.

    Delivery lead times will vary but the following is typical -

  • Single cables or small orders up to 20 cables - shipping within 24 hours.
  • Orders of 100 - 200 cables - shipping normally withing 2-3 working days,

    Delivery lead times for larger orders should be confirmed by contacting us.

    Please Click here to contact us with custom cable enquiries



    Top of page